-7027396206381770386.jpeg?w=1500&h=1500)
-7027396206381770386.jpeg?h=1500&q=80&w=1500)
Powerful Cleaning Performance
3-in-1 Function: Vacuums, scrubs, and filters in a single cordless pass.
20L/min Suction Flow: Effortlessly captures silt, sand, small stones, leaves, and insects.
10W High-Efficiency Motor: Consistent, powerful suction from start to finish.
Cordless Freedom & Runtime
1600mAh Rechargeable Battery: Up to 90 minutes of uninterrupted cleaning on a 2-hour charge.
Adjustable Telescopic Pole: Extends from 23.6 to 65 inches; clean standing up, no bending required.
Fully Cordless Design: No tangled hoses, no power outlets needed.
Versatile Cleaning Heads
Three Interchangeable Brush Heads: Triangular head for corners and stairs; flat head for floors; long brush head for walls and irregular surfaces.
Precision Bristle Design: Loosens stubborn dirt while protecting pool surfaces.
Smart & Safe Operation
Built-in Sensor Switch: Automatically powers on when submerged; auto-stops when lifted to protect the motor and save battery.
IPX8 Waterproof Rating: Fully submersible and safe for all pool types, hot tubs, and aquariums.
Ultra-Quiet Underwater Operation: Works silently beneath the surface; no disruptive motor noise.
What's Included
PoolNexa Vacuum Cleaner Unit
Telescopic Pole
Triangular Brush Head
Flat Vacuum Head
Long Brush Head
Charger
User Manual
Need help? Contact us at support@poolnexa.com – we respond promptly and are here to assist you.
35 mW/cm² light intensity
The Veonskin™ LED Mask uses medical-grade LEDs with an irradiance of 35mW/cm². This allows light to deeply penetrate the skin while providing enough therapeutic dose in a short time, leading to better results.
129 Medical-Grade LEDs
Veonskin™ LED Mask features 129 medical-grade LEDs, providing deep penetration to target skin concerns at their source.There are a total of 516 beams, with each matrix chip containing 4 independent light-emitting chips， Even light distribution ensures full skin coverage, delivering consistent and visible results for effective at-home care.
10,000 Tested Users
Unlike other LED masks, Veonskin™ LED Mask is designed with best-fit silicone, shaped after testing and analyzing the faces of 10,000 users. Made from liquid silicone material, it ensures a comfortable fit without causing discomfort.
🔴 Red Light (620-630 nm): Stimulates collagen production, improves skin vitality, and reduces wrinkles and fine lines.
🔵 Blue Light (440-465 nm): Suitable for sensitive skin, effectively addresses frequent acne and clogged pores.
🟢 Green Light (520-525 nm): Regulates sebum secretion and balances oil and moisture.
🟡 Yellow Light (630+520 nm): Brightens complexion, breaks down pigmentation, and improves the appearance of scars.
🟣 Purple Light (630+460 nm): A dual-frequency combination of red and blue light that reduces acne marks (post-acne spots).
🔷 Cyan Light (525+460 nm): Enhances skin energy and accelerates metabolism.
🌈 Infrared Light Combination (460+520+630 nm): Effectively reduces redness and deeply revitalizes the skin.
To activate the mask, connect it to the control unit.
Note: Do not connect the control unit to a Type-C charging cable while using the mask. For safety reasons, the mask will not operate while charging.
It is recommended to use the product 3–4 times per week, with each session lasting 10–20 minutes.
When using the blue light mode, each session should not exceed 10 minutes.
The battery has a capacity of 3000 mAh and can be fully charged in approximately 4 hours.
A full charge provides about 2 hours of use for the face mask alone, or 1 hour of use when using both the face and neck combination.
We strongly recommend using the charging cable that comes with the red light mask.
Using other cables may cause issues such as incomplete charging or the device not charging at all, due to voltage compatibility.
For optimal performance and safety, always use the original cable provided with the product.
It is important to handle the LED mask with care.
Avoid rubbing, squeezing, or applying excessive pressure to the mask, as this can damage the internal components and cause some of the LED lights to stop working.
To ensure the mask remains durable and functions effectively, always store it properly and treat it with caution.
loading
